January Apron - Smock Apron - Child or Adult

Here is the tutorial (?maybe) for my first apron. It is so quick and easy and so comfortable. I made this first for me but as it makes me look even fatter, I will not be posting the photos of me in mine. You get to see the lovely miss Hannah model this smock this month. I assume you have some basic sewing knowledge but not tons. If you have questions, ask me and I will happily clarify my poor instructions. This apron is open in the back but you can close it if you want.

Pattern pieces - Cut these out of paper if you need that or use a rotary cutter, cutting mat, and quilting ruler to measure the fabric itself.

Body of Apron - measure around your chest just under your armpits and add half again to that number for the width of your smock skirt. (For example a 36" bust + 18 = 54") The length of the top is however long you want it. You could take this to the floor if you want. I wanted mine to come just past my hips so I made mine 18"
For Hannah's smock I wanted to use one of those embroidered dishtowels so found one wide enough to go around her with room to spare and cut it in half to make one for her and one for another lucky little girl. (not sure who yet)
Contrasting band at the top of the apron - Measure around your bust again and add about 2-4 inches. Test this measurement on you and make sure it isn't too snug or too loose. I made mine loose and I like that but Hannah's is a bit snug and it won't fit her long unless I make an alteration ( I have a plan and if I get a snap press I will let you know what that is). This strip needs to be 3 1/2 inches wide (for example 36" bust + 4"= 40" x 3 1/2"). You need to cut out 2 of these one of which is your facing. You can line this with interfacing you choose but I didn't I really hate working with that stuff and never remember to have any on hand or can't find it when I need it.
Shoulder Straps - Find a comfortable length from your front to your back over your shoulder. This is easier to measure on someone else than yourself. My straps are too big and keep flopping of my shoulder but Hannah's fit perfectly. I will have to take mine in. They drive me nuts. A good average length is 14" and the straps need to be cut at 4 1/5". You need 2 of these.
Pocket - This is optional. Cut out two squares the size you want (4x6"). Place them together and curve to bottom if you like or leave it straight. It's your pocket, do what you like. :o)

Sewing order:
Shoulder straps - Fold the fabric in half with right sides together and sew each strap with a 1/4" seam.

Turn the straps to the outside and press them as you like. The seam can go to one side or you and slip it to the back if you want to be fancy. It is your strap, do as you like. :o)
Contrasting band - For the piece that will be on the inside, fold the bottom edge under ( to the wrong side) 1/4". I just eyeball that. (I really hate fussy measurements).

Now you need to pin your straps in place. To do this I folded the outside band in half and marked that then I measured out about 3 to 5 inches and placed the strap end on each side of the front. (I know this sounds confusing but if you will place it out in fornt of you, I promise it will make sense.) Next do the same from the middle back of the the band (this is where it will close in back and overlap) measure back on each side about 3-5 inches and pin the other end of each strap on each side. MAKE SURE you are pinning them to the top of your band so that your straps go over your shoulders and not under your boobs. :o) For better instructions go here. She has a tutorial for a smock shirt and has descent drawings. They helped me get the idea.
Now that you have your straps pinned in place, place your lining fabric on top, right sides together and stitch all the way around, encasing the straps inside with 1/4" seams.

Now for your skirt. Because I used a dishtowel for Hannah's smock I didn't need to finish the edges but if you use yardage then you will want to make a narrow hem on the sides and bottom of your piece. At the top you need to make a gathering seam by sewing the whole length with the widest stitch your machine will make near the edge of your fabric. Once will do, however, twice is more stable. (this is one way of doing things, you can also make tucks or pleats all the way across, it's your apron, do as you wish). Now pin this to the bottom of the front piece of your contrasting band. When I did this I didn't go right to the ends and left about and inch or so of band on each end for putting buttons or snaps or whatever there. Now sew that with a 1/4" seam.

Now tuck the seams to the inside of the band and pin the front and back together with wrong sides together and top stitch around the whole thing to finish off the lining seam ( this is why you folded the lining side up 1/4 inch). You could stitch this by hand but who has time for that. :o) This works for me. You can see in the photo here the inside of the apron.

Pocket - Take your two pieces of pocket fabric and place them together with right sides facing and sew them all the way around the outside edge, leaving and opening for turning. Use a 1/4" seam.

Turn to the outside and press. You can whip stitch the open shut but I just made sure my opening was on the side and took care of it when I top stitched the sides and bottom of the pocket to sew it in place. So now top stitch the top of the pocket and place the pocket where you want it and pin it in place. Top stitch around the sides and bottom.

Now you are done! This is actually the one that I am going to give away I like it BUT....

I really like this one better that I made for my Hannah baby Chicky.

I hope this wasn't too confusing. I may come in and fix this all. I don't do well with directions. I promise I will do better next month. Maybe if I write it on paper as I go. Who knows. You will just have to wait until Feb. to get the next one. I have several in mind and will just have to choose one.